A Guide to Textile and Clothing
A Guide to Textile and Clothing
Definition of Emulsion Jute batching is of a simple nature, usually containing only the mineral oil, water and emulsifying agent. An emulsion is an intimate mixture of two immiscible liquids, one dispersed in droplets from inside the other. It has two phases – an external phase and an internal phase. The external phase is the water[…]
The factors which put limitation for higher production in ring frame are – Maximum traveller speed It is limited by the types of ring flange, style of traveller, wt. of traveller and rate of traveller run. Maximum roller delivery speed The limiting factors beings the ability of the operative to piece-up the broken ends and the[…]
Ring The functions of ring are: Traveller It performs the following functions: It also performs many other functions involving highly complicated problems of higher physics. Creel The function of the creel is to hold the roving bobbin over a roller beam within a convenient height to easily handle the roving. The creel must permit[…]
Drafting system can be broadly classified under two heads namely: The system with apron can again be classified into three groups: Example of regular drafting system without apron: Example of single apron drafting system: Example of double apron drafting system: Example of multiple Apron drafting system: OM – Super High Draft System This system is[…]
The civilization of ancient Greece has left a rich heritage to posterity in her chaste and refined simplicity of dress. It is to the costume of Greece of twenty five hundred years ago that we turn for grace, beauty of line, refinement of detail, and unity of composition. In the study of Greek literature, painting[…]
The Faults Found in Ring Frame Yarn and their Causes Soft Yarn Generally caused by slack spindle bundles, twist change wheel too large, empty bobbins not properly pushed down during doffing. Uneven Yarn Either travelers are too heavy or for spinning fine counts from inferior cotton. Fuzzy Yarn Rings too large, by ballooning or bad lubrication of[…]
