An Overview of V-bed (Manual) Knitting Machine

Main Parts Functions of Different Parts The functions of different parts are illustrated below in sequence wise. Yarn guide: it is used to maintain the path of the yarn. Cymbal tension: it is a spring loaded tensioning device. It is used to maintain the uniform tension of yarn. Yarn take-up: it is used to take-up the yarn from[…]

Huck a Back and Mock Leno Weaves

Huck a Back Weave The huck a back weaves are basically toweling fabrics. They are generally associated with honey comb fabrics and hence known as honey comb effects. They are constructed by alternately combining a floating with a plain weave. Interestingly, a number of weaves are derived from these weaves. Huck a back weaves are[…]

An Overview of Straight Knife Cutting Machine

Straight Knife Most cutting room which cut garments in bulk, but not in sufficient bulk to justify the purchase of computer controlled cutters, makes use of straight knives. Requirements of cutting: Features M/C Description The elements of a straight knife consists of – It is Working Principle  Two kind of power are required to operate[…]

An Overview of Garments Lining [A to Z]

Definition of Lining Garments lining have functional and consumer appeal objectives and this section will examine the principles involved, starting with the material itself. Linings are generally a functional part of a garment, an accessory. They are available as warp knits but they are predominately woven are made from polyester, polyamide, viscose for use where a[…]

Water Functions in the Textile Industry

Introduction Within the textile industry, several sectors can be distinguished. The most crucial water-consuming sector within the textile industry is the textile finishing industry. Water can be used in two different ways: a medium for textile treatment with direct contact with the material or as a heating/cooling medium without direct contact. The following figure shows a[…]

Scroll to top