A Guide to Textile and Clothing
A Guide to Textile and Clothing
Needle-punched fabrics produced with a modified needle bed and needles that penetrate beyond the surface to form loops on the back can be made to resemble loop pile, velour, or velveteen. The loops either are left uncut or are cut and brushed to give the surface appearance of the pile-woven fabric. Mechanical bonding is the oldest method[…]
Main Features of Denim Fabrics Typical denim fabrics are woven from coarse, indigo-dyed cotton yarn. They are hard wearing, high density fabrics with a high mass per unit area. Today, more denim is produced in the world than any other type of cloth. Its long term popularity has made it a fashion fabric in casual wear. Raw Materials of[…]
There are mainly three types of fabric such as woven, knitted, and non-woven. Multi-component or bonded fabrics fall into the third category. These fabrics are produced by bonding two or more layers of woven or knitted fabrics or fibre layers by loose stitching or by adhesive bonding. These are special types of fabric for special purposes. In this article,[…]
Definition Double cloths are fabrics in which there are at least two series of warp and weft threads each of which is engaged primarily in producing its own layer of cloth, thus forming a separate face cloth and a separate back cloth. The two layers may be only loosely connected together in which case each may be[…]
Quality assurance is an important part of knitted fabric production system. We should maintain the proper guideline of the production process to assure the quality of knitted fabric for the buyer acceptance of the end products. The process can be discussed as below: Quality Assurance Procedure Quality assurance procedure may be divided into two major parts: Online[…]
The weave shows the interlacing pattern of warp and weft. Each weave consists of the following parts or fields. Contact Fields These are the contact points between warp and weft crossing at right angle. The number of contact fields always equals the product of the number of warp and weft threads. Contact field = RNwa X[…]
