Enter your lot size and inspection level. Get the sample size and the accept and reject numbers in seconds. This tool follows ISO 2859-1 and ANSI/ASQ Z1.4. It uses single sampling and normal inspection only.
Fill in the fields, then press Calculate. Defect counts are optional.
| Defect class | AQL | Ac | Re | Found | Verdict |
|---|
How AQL Sampling Works
AQL means Acceptable Quality Limit. It is the worst defect level you will still accept. You do not check every piece. You check a sample. Then you judge the whole lot from it.
The method has three steps.
- Lot size and inspection level give a code letter.
- The code letter gives the sample size.
- The sample size and AQL give Ac and Re.
Ac is the accept number. Re is the reject number. Re is always Ac plus one. If defects found are at or below Ac, accept the lot. If they reach Re, reject it. One critical defect rejects the lot.
Inspection levels
General II is the default. Use it for most garment orders. General I needs fewer pieces. General III needs more, so use it when the risk is high. Special levels S-1 to S-4 give small samples. They suit costly or destructive tests.
What this tool covers
It covers single sampling and normal inspection. It does not cover tightened or reduced inspection.

The Sampling Tables
These are the tables the calculator uses. Read them yourself if you want to check a result.
Code letters by lot size
| Lot size | S-1 | S-2 | S-3 | S-4 | General I | General II | General III |
|---|---|---|---|---|---|---|---|
| 2 – 8 | A | A | A | A | A | A | B |
| 9 – 15 | A | A | A | A | A | B | C |
| 16 – 25 | A | A | B | B | B | C | D |
| 26 – 50 | A | B | B | C | C | D | E |
| 51 – 90 | B | B | C | C | C | E | F |
| 91 – 150 | B | B | C | D | D | F | G |
| 151 – 280 | B | C | D | E | E | G | H |
| 281 – 500 | B | C | D | E | F | H | J |
| 501 – 1,200 | C | C | E | F | G | J | K |
| 1,201 – 3,200 | C | D | E | G | H | K | L |
| 3,201 – 10,000 | C | D | F | G | J | L | M |
| 10,001 – 35,000 | C | D | F | H | K | M | N |
| 35,001 – 150,000 | D | E | G | J | L | N | P |
| 150,001 – 500,000 | D | E | G | J | M | P | Q |
| 500,001+ | D | E | H | K | N | Q | R |
Accept numbers by code letter
| Code | Sample | AQL 0.65 | AQL 1.0 | AQL 1.5 | AQL 2.5 | AQL 4.0 | AQL 6.5 |
|---|---|---|---|---|---|---|---|
| A | 2 | – | – | – | 0 | 0 | 0 |
| B | 3 | – | – | 0 | 0 | 0 | 0 |
| C | 5 | – | 0 | 0 | 0 | 0 | 1 |
| D | 8 | 0 | 0 | 0 | 0 | 1 | 1 |
| E | 13 | 0 | 0 | 0 | 1 | 1 | 2 |
| F | 20 | 0 | 0 | 1 | 1 | 2 | 3 |
| G | 32 | 0 | 1 | 1 | 2 | 3 | 5 |
| H | 50 | 1 | 1 | 2 | 3 | 5 | 7 |
| J | 80 | 1 | 2 | 3 | 5 | 7 | 10 |
| K | 125 | 2 | 3 | 5 | 7 | 10 | 14 |
| L | 200 | 3 | 5 | 7 | 10 | 14 | 21 |
| M | 315 | 5 | 7 | 10 | 14 | 21 | 21 |
| N | 500 | 7 | 10 | 14 | 21 | 21 | 21 |
| P | 800 | 10 | 14 | 21 | 21 | 21 | 21 |
| Q | 1,250 | 14 | 21 | 21 | 21 | 21 | 21 |
| R | 2,000 | 21 | 21 | 21 | 21 | 21 | 21 |
A note on dashes
A dash means the sample is too small for that AQL. Use the numbers from the next larger code letter. Keep the sample size of your own code letter. If every cell down the column is a dash, the result is Ac 0.
Worked Example
You have a lot of 5,000 garments. You use Level II. The code letter is L. The sample size is 200 pieces. That is 4% of the lot.
- Critical, AQL 0: Ac 0, Re 1.
- Major, AQL 2.5: Ac 10, Re 11.
- Minor, AQL 4.0: Ac 14, Re 15.
The inspector finds 0 critical, 8 major and 12 minor defects. All three pass. The lot is accepted. If the inspector had found 11 major defects, the lot would be rejected.

Critical vs Major vs Minor Defects
Critical defects
These are unsafe or illegal. A broken needle left in a garment is one. So is a loose button on a child’s product. The AQL is 0. One is enough to reject.
Major defects
These hurt use, sale or look. Open seams, holes, wrong sizes and wrong colors are common examples. The customer would likely return the item.
Minor defects
These are small flaws. Most buyers would not notice them. A loose thread or a slightly uneven stitch fits here.
Agree on the defect list before inspection starts. Put it in writing. That avoids arguments later.
How to Read the Result
The result shows the code letter first. Then the sample size and its share of the lot. Each defect class gets its own row.
- Ac is the most defects you can find and still accept.
- Re is the count at which you must reject.
- Each class is judged on its own.
- The lot passes only if every class passes.
If the sample is larger than the lot, inspect 100% of the lot. The tool tells you when this happens. Leave the defect fields blank to see the plan only.
Checking fabric rolls instead of finished goods? Try the Fabric Quality Inspection Calculator (4-Point System).
Common AQL Mistakes
Sampling only the easy cartons
Take pieces from all over the lot. Top cartons are not enough.
Confusing AQL with defect rate
An AQL of 2.5 does not mean 2.5% defects are guaranteed. It is a limit used for sampling decisions.
Using one AQL for everything
Critical, major and minor defects need different limits. Keep them separate.
Changing the AQL after inspection
Set the AQL in the contract. Do not move it once you see the count.
Mixing lots
A lot should come from one batch, one style and one production run. Mixed lots hide problems.
FAQs
Can I use this for tightened or reduced inspection?
No. This version covers normal inspection only.
Why is the critical AQL fixed at 0?
Critical defects affect safety. Buyers accept none.
Which AQL should I pick?
Most apparel buyers use 2.5 for major and 4.0 for minor. Follow your contract first.
Does this replace the printed standard?
No. Use it as a fast guide. For disputes, check the printed ISO 2859-1 or ANSI/ASQ Z1.4 tables.
You also like Fabric Inspection: Four Point System



